Yes, all releases of the MERLIN MAGIX are capable of displaying Caller
ID. To use the service, the system must have:
- The local telephone companies' Customer Local Access
signaling Service
- Loop start lines,
- A 412 LS-ID-TDL, 408 GS/LS-ID-MLX, or 800 GS/LS-ID
Circuit Module
- To use the 800 GS/LS module, the Magix Processor
must be R1.5 or higher.
For Merlin Magix systems, Calling Party Name is also supported. Calling
Party Name does what its name suggests - it provides the name of the calling
party. A button can be programmed on the multiline 4400-series, MLX, ETR,
and MLS telephones to toggle between Calling Party Number and Calling Party
Name.
When the button's LED is lit, Calling Party Name and not Calling Party
Number information appears and will continue to appear until you press the
button again (the LED turns off).
