Use this procedure to assign or remove Forced Account Code Entry. When this feature is programmed on individual extensions, the user must enter a 1- to 16-digit account code before making an outside call.

Factory setting: Forced Account Code Entry is not assigned to any extensions.

Programming Codes: *82
Feature Code: 82

To administer Forced Account Code Entry (FACE) for an extension from the System Programming console:

1. Press Menu.
2. Press System Program.
3. Press Exit or Start.
4. Press Extensions.
5. Press Account.
6. Dial the extension number that you want to administer.
7. Press Enter to assign Forced Account Code Entry to the extension or press Delete to remove Forced Account Code Entry from the extension.
8. Press Exit or Back.
9. Press Home or Exit to exit programming mode.

Use the procedure below to program an Account Code Entry button:

On an ETR, MLS, MLX or 4400-series phone:

1. Press Feature or # and dial 00 to enter programming mode.
2. Press the button you want to program for Account Code Entry and dial *82.
3. Press Feature or # and dial *00 to exit programming mode.

On an MLX display phone:

1. Press Menu to enter programming mode.
2. Press Ext Program.
3. Press Start and then press the button you want to program. If a feature is already administered on the button, press Delete to remove that feature.
4. Press the button again.
5. Press List Feature and select the feature to be programmed. If the desired feature is not a choice, press More or Right Arrow Key until the feature is displayed.
6. Once you have located the feature, press the button next to it and then press Enter.
7. Press Exit or Back.
8. Press Home or Exit to exit programming mode.