Merlin 1030/3070
Feature Module 1 Administration Manual Pg. 28, 29
Feature Module 2,Administration Manual Pg. 34, 35
Feature Module 3 Administration Manual Pg. 21, 22
Feature Module 4 Administration Manual Pg. 42, 43
Feature Module 5 Administration Manual Pg. 47, 48
 

You can control the call restrictions on each phone in your business.

You may want to restrict some voice terminals to intercom calling only. For example, you may want to restrict telephones used by employees who never need to call outside your business, or telephones in public places, such as a lobby.

You can restrict employees who never need to make long distance calls as part of their jobs to intercom and local calling without interfering with their efficiency.

You assign lines and call restrictions one voice terminal at a time.

Programming: Follow these steps to assign Call Restrictions

1. Set the administrator/attendant console for system administration down (located on the Processor Module in the Control Unit). Switch A.
2. From Extension 10 Touch the button labeled Adm. Tel (located above the conference button).

   The green light beside the button stops flashing and remains steadily lit.

3. Dial the intercom number of the phone you want to restrict.

   The voice terminal gives a two-beep signal for you to begin.

    

4. Touch the button labeled Call Rstr (first long row last button) until the green light beside it shows the code for the calling privileges you want this phone to have. Each successive touch gives you one of the codes:

   STEADY GREEN ON = All calls permitted

   FLASHING GREEN = Local calls only

   GREEN OFF = Intercom calls only

5. Follow steps 3 through 6 if more than one phone needs to have Call Restriction.
6. If you have no further system administration to do, slide the T/P switch to the center position and set switch A on the Processor Module to Attendant (up) to return to normal operation.