1. LABEL THE BUTTON YOU WANT TO PROGRAM

2. SLIDE THE T/P SWITCH ON THE LEFT HAND SIDE DOWN

Phone will ring

3. TOUCH THE BUTTON YOU HAVE LABELED

4. DIAL THE FEATURE PROGRAMMING CODE (SEE BELOW PROGRAMMING CHART)

5. DIAL THE ADDITIONAL NUMBERS IF NECESSARY (FOR OUTSIDE AUTODIAL)

6. RETURN THE T/P SWITCH BACK TO THE CENTER POSITION.

Feature codes

Auto Answer intercom (*) (7) (0)- Touching Auto Answer-Intercom causes your Hands-Free Unit to turn on automatically whenever you get an intercom call. The green light reminds you that this feature is on. When the feature is on and you get an intercom call, just talk backyou dont have to press any buttons or even lift the handset. Touch Auto Answer-Intercom again to turn it off.

Do not disturb (*) (7) (1)- To prevent any calls from ringing at your phone, touch Do Not Disturb (green light comes on). Transferred calls return to the sender and intercom calls get a busy signal. Outside callers hear the usual ringing sound, even though your phone does not ring. Be sure to use Do Not Disturb only if someone else answers your outside calls. The green lights next to the line buttons will still work normally so you can pick up calls if you wish. To restore ringing, touch Do Not Disturb.

Last Number Redial (*) (7) (3)- To redial the number you dialed most recently, touch Last Number.

Saved Number Redial (*) (7) (4)- To save a number for later redialing, touch Saved Number before hanging up. The saved number is not affected by any subsequent calls, and you can redial it at any time by touching Saved Number.