All Partner II

Partner II R4.1 Programming and Use Manual Pg. 5 - 180

Description

This feature is available only on PARTNER- and MLS-model phones.

This System Programming procedure defines a four-digit password that users can enter from PARTNER- and MLS-model phones to override dialing restrictions (if the extension has access to an outside line).

Related Features

The password overrides all dialing restrictions except Line Access Restriction (#302) and Pool Access Restriction (#315).

Once a password is programmed, you must enter it to turn Night Service on and off. Additionally, if Night Service is on, users in the Night Service Group must enter the password to make any outgoing calls (except calls to numbers on the Emergency Phone Number List (#406) and Marked System Speed Dial Numbers). Dialing restrictions for extensions not in the Night Service Group remain the same as during normal daytime operation.

Programming

To program a System Password:

1. Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 4 ] [ 0 ] [ 3 ]. A display similar to the following appears: Set System Password Data----
2. Enter a four-digit password or press [ Remove ] to delete the existing password.
3. Select another procedure or exit programming mode.

Using

1. Before lifting the handset or turning on the speaker at a PARTNER- or MLS-model phone, press [ Hold ].
2. Enter the password. The System Password does not appear on display phones.
3. Press an outside line button (or press [ Intercom ] [ 8 ] and a two-digit line number) or a pool button (or press [ Intercom ] and a three-digit pool access code) and lift the handset.

4. Dial the number. The password is in effect until you hang up the phone.