| What is the
procedure I use to connect to Remote Administration to program the
Partner ACS system? |
Partner ACS R3.0 Remote Administration Getting Started Guide Pg. 10
There are three methods of connecting to a PARTNER system.
- Operator Assisted
Use this method when the Partner System does not have an active Auto
Attendant system or a dedicated line for the remote access card.
- Automated Attendant
Use this method when the Partner system has an Automated Attendant
turned on.
- Direct Dial
Use this method when you have established either of the following for
the Remote Access Card:
- An intercom extension
- A dedicated outside line.
Regardless of the method you use, you will need a Remote Administration
Password before you can connect. (See Administrative Password)
