Automated Attendant

You connect to the Remote Access card by going through an automated attendant (such as a voice mail system that automatically answers and routes the call). You can use this method after business hours or anytime the Automated Attendant is active. To use the Automated Attendant method, you must have previously established a Hunt Group for the PARTNER Remote Access card.

1. On the File menu, select Connect to PARTNER System.
2. Select Automated Attendant, and click Next.
3. Enter the dial string.
   • phone number
   • seven commas
   • 7 7 and the single-digit Hunt Group number for the Remote Access Card
4. Click OK.
5. When prompted, enter the Remote Administration Password and then click OK.

To Create a Hunt Group while at a Partner Telephone

1. From extension 10 or 11, activate System Programming by pressing [Feature] [0] [0].
2. Press the left [Intercom] button twice.
   • System program appears on the display
3. Enter [#] [5] [0] [5].
4. At the GROUP: prompt, enter a group number (16)
   • We recommend the group number 6.
5. The following display appears
   • HUNT GROUP 6
   • EXTENSION:
6. Enter extension [7] [6]
   • (This is the pre-established extension number for your PARTNER modem.)
7. Exit programming mode by pressing [Feature] [0] [0].