Answer:
You have the capability of programming different Features
onto extra buttons on your phone. Intercom autodial buttons on
24 button sets come pre-programmed on 308/616.
How to program Spirit 308/616: (24-button sets only)
Make sure administration switch is in the 'off' position on
the Control Unit. For the following Features:
Manual Signal
- Press [Intercom][Speaker][*][0]
- Dial the intercom number you want to signal and press
button 26 or 27 only. (located in top row, middle and right
end button)
Paging Loudspeaker
- Press [Intercom][Speaker][*][0]
- Dial [6][0] and press button 26 or 27.
Paging All Intercoms
- Press [Intercom][Speaker][*][0]
- Dial the two-digit code (61- 66) and press button to be
used for group paging.
Personal Speed Call
- Press [Intercom][Speaker][*][0]
- Dial the telephone number to be stored and press the
button where you want the number stored.
Erase Programming
- Press [Intercom][Speaker][*][0]
- Press button to be erased and hang up.
