How to program 308/616 Outward Restriction:

1. At the Control Unit, turn the administration switch to the on position
2. At Ext. 10, press [Intercom][Speaker][*][0] (you'll hear a three beep confirmation tone).
3. Dial [2].
4. Press [Station] (Transfer button) and the two-digit ext. number (you'll hear another confirmation tone).
5. Press [Feature] (Conference button) and dial [5].
6. Dial the indicator code
   • [1] Indicator light Off = Outward Restricted
   • [2] Indicator Light On = Unrestricted (installed)
   • [3] Indicator Light Even Flash = Toll Restricted

   All the line indicator lights will show the current overall outside service for the telephone set.

7. Press [Station] (Transfer button) and the next ext. number to be programmed
8. Press [Speaker] to exit programming.
9. Turn the administration switch to the off position on the Control Unit.